Vehicle Recalls

If the driver or front passenger seatbelt cables cannot properly restrain the front seat occupants, they would be at an increased risk of injury.

During a crash, the improper welds may fail, allowing any stowed luggage to move into the passenger compartment, increasing the risk of injury.

Reduced collision mitigation functionality may increase the risk of a crash.

Insufficient welds could cause the inflator to separate and propel air bag debris into the cabin during a crash. Also, the inflator could fail to inflate during a crash, increasing the risk of injury.

If the mid-ship marker light is missing, other drivers can mistake the length of the vehicle, increasing the risk of a crash.

A short circuit increases the risk of a fire.

If the outer tube corrodes, there may be a rapid loss of the gas used to provide lift assistance, causing the lift gate to fall suddenly, increasing the risk of injury.

If referencing the information that is on Federal placard, the operator could under-inflate the tires causing a reduction of vehicle handling and increasing the risk of a crash.

A rubber LP gas line connected to the pilot light can get hot and melt, increasing the risk of a fire.

If the supplemental brake fluid label is missing, the operator may use an incorrect brake fluid which could damage the brake system and increase the risk of a crash.

If the bracket detaches, the door can fall open, creating a crushing hazard or, if the door is completely open, the cable and bracket could act as a projectile, possibly causing personal injury.

If the trailer brake lights stay illuminated while being used, other drivers may be confused, increasing the risk of a crash.

If the door detaches, it can become a road hazard, increasing the risk of a crash.

If "PARK" illuminates instead of the word "BRAKE," the driver will be unaware of a braking issue or malfunction, increasing the risk of a crash.

If door opens while the vehicle is moving, there would be an increased risk of injury to the vehicle occupants.

Cracking of a steering knuckle carrier may result in its total failure, allowing a wheel to separate from the vehicle, increasing the risk of a crash.

A loose pinion gear may bind, possibly resulting in the rear wheels locking up and increasing the risk of a crash.

An engine stall increases the risk of a crash.

If the brake line melts, brake failure may result, increasing the risk of a crash.

If the seat moves in the event of a crash, the seat occupant would be at an increased risk of injury.