2016 FORD FUSION Safety Overview

Component: ENGINE AND ENGINE COOLING

"The contact owns a 2016 Ford Fusion. The contact stated that while driving the vehicle at an undisclosed speed, the vehicle felt as though it were going to shut off unexpectedly. The check engine warning light illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the spark plugs needed to be replaced. The contact stated that after the spark plugs were replaced, one of the cylinders was misfiring. The spark plugs were replaced a second time, but the failure persisted. The vehicle was taken to another independent mechanic, where it was diagnosed that coolant intrusion into the engine had resulted in engine failure, and the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 130,000."

Component: UNKNOWN OR OTHER,LANE DEPARTURE

"My rear view camera hasn’t worked since October 2025 and I’ve had multiple incidents where I’m reversing and almost hit a pedestrian.. This is a big problem for me because im used to having my rear view camera.. I don’t understand why it’s taking so long to find a simple fix to this issue.. I’ve waited for almost a year and still nothing.. When will this issue be resolved?."

Component: ENGINE

"Engine reached high temperature on July 2 2016 the results of which required the replacement of the radiator. Apparently there is a class action regarding coolant system issues for my vehicles 2.0L engine. The radiator failure may be the result of this issue. Engine overheated"

Component: STEERING

"The contact owns a 2016 Ford Fusion. The contact stated that while driving 70 MPH, the vehicle suddenly lost power steering functionality and nearly crashed. The contact swerved and slammed on the brake pedal abruptly, causing the contact to strike the left side of the head against the upper side of the driver's side window. The contact sustained a headache, a bump and dizziness and sought medical attention. The power steering warning light was illuminated after the failure. The vehicle was taken to the dealer, where it was diagnosed and determined that the power steering assembly needed to be replaced. The vehicle was not repaired. The contact stated that the failure was associated with NHTSA Campaign Number: 19V632000 (STEERING). The contact resided in Wisconsin, which was one of the States listed in the recall. The manufacturer was notified of the failure and informed the contact that no assistance would be provided because the vehicle was not covered under warranty. The failure mileage was approximately 178,000."

Component: UNKNOWN OR OTHER

"Back up camera screen is going out intermittently causing a hazardous situation"

Component: VISIBILITY/WIPER

"I own a 2016 Ford Fusion affected by Safety Recall 25SA9 (NHTSA Recall 25V695) regarding the rearview camera. I took my vehicle to an authorized Ford dealership on June 25, 2026, to have the recall repaired. The dealership confirmed that the repair procedure is currently available only for Mustang vehicles and that no repair is available for my Fusion. The dealership documented this on the repair order. I also contacted Ford Customer Relations, and Ford confirmed there is currently no confirmed ETA for the recall remedy. I am fully willing to complete the recall immediately, but I cannot do so because the manufacturer has not made the repair available for this vehicle. I am submitting this complaint because the manufacturer has been unable to provide a timely remedy for this safety recall despite my attempt to have the repair completed. I respectfully request that NHTSA review this situation."

Component: VISIBILITY/WIPER,BACK OVER PREVENTION

"My backup camera does not work any longer. I have had several near-misses of collisions with both cars and people. Please make the recall fix available!! On the date of incident field, I just put the last time it happened. There have been multiple dates."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that while in reverse(R) on several occasions, the screen display started blinking, went blank, and the screen became inverted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was 93,000."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part required for the repair was unavailable. The contact stated the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse(R), the rearview camera displayed a distorted image alongside an erroneous representation of object proximity, causing surrounding objects and vehicles to appear further away than they actually were. The dealer was contacted, and it was confirmed that the remedy was not available. The manufacturer was not made aware of the issue. The failure mileage was approximately 135,000."

Component: STEERING,ELECTRICAL SYSTEM,SERVICE BRAKES

"After hitting 100,000 mile my car electronics failed and caused my steering to fail and all other safety equipment like airbags and brokering system"

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received a notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed a distorted image, with an unknown warning message displayed. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 62,000."

Component: ELECTRICAL SYSTEM

"The recall for the backup camera has been open since october with no remedy. This seems like an excessive amount of time and is giving me trouble selling my vehicle. How long is the manufacturer given to remedy the issue?"

Component: ELECTRICAL SYSTEM

"When backing up the rear camera went to black screen and wouldnt display the rear view. Almost hit a pedestrian because they were directly behind the car. This problem happens sometimes and I am not sure how to replicate it except for putting the car in reverse and seeing if it is going to display the rear view or not. I need this recall to be completed ASAP, it has been released since October and I’m still having issues with it 6 months later and there is no fix for this?? Its just frustrating"

Component: STEERING,SERVICE BRAKES, HYDRAULIC

"The contact owns a 2016 Ford Fusion. The vehicle was serviced under NHTSA Campaign Numbers: 23V162000 (SERVICE BRAKES, HYDRAULIC) and 19V632000 (STEERING), but the failure persisted. A month after the recall repairs were completed, while driving at an undisclosed speed, the brake warning light was illuminated and blinked, and the steering wheel failed to function as intended. The contact used force to veer the vehicle to the side of the road. Once the contact was able to pull to the side of the vehicle, the engine was turned off. The contact called her boyfriend, who drove to the site of the incident and assisted the contact and pushed the vehicle to the residence. The dealer was contacted and at first refused to inspect the vehicle. The contact called the dealer again, and the dealer sent a mobile mechanic to the residence. However, no cause for the failure was found. The contact was informed that a diagnostic test would be performed on the vehicle. However, the contact would be responsible for the bill. The vehicle remained at the residence unrepaired. The manufacturer was not made aware of the failure. The failure mileage was unknown. "

Component: BACK OVER PREVENTION

"See attached document for complaint."

Component: SERVICE BRAKES,ENGINE,FUEL/PROPULSION SYSTEM

"The entire engine/motor"

Component: ENGINE,FUEL/PROPULSION SYSTEM

"There is a problem with the purge valve causing my vehicle to rough idle and even cut off on me in the middle of traffic and even on the interstate. This issue is going on with a plethora of people with the same year make and model as me yet no recall has been issued. When I put gas in the car it won’t start for some time. If I’m not constantly pressing the accelerator the car will turn off by itself"

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera displayed a blank screen or the message “Camera not Available” intermittently. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. Several dealers were contacted. The dealers confirmed that the part for the recall repair was not yet available. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 287,509."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image would sometimes appear blank and other times the image would flicker. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time to provide a remedy for the recall The approximate failure mileage was 150,000."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera would intermittently function at times. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the parts to complete the recall repair were not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that the remedy parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 82,014."

Component: STEERING

"I took my car to have recalls fixed. The next time I drove it after that my power steering shut off while driving. The warning lights for "Hill Start Assist Not Available" and "Service AdvanceTrac" came on. After some research it looks like I have the exact problem for recall 19S26. However when I called the dealership they couldn’t find the documentation if they fixed this or not on my vehicle. They said since it is not an open recall they do not have to fix it. Can you please open/reopen this recall for my vehicle so I can address this specific issue."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera intermittently operated but was turning on and off. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 83,000."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while in reverse(R), the rear-view camera image failed to display a clear image on the screen. The local dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 65,000."

Component: ENGINE

"CAR IS OVER HEATING AND ENGINE LIGHT ON. SAME ISSUES AS THE 2017 FORD FUSIONS RECALL BUT I WAS TOLD THE FIRE RISK FROM ENGINE COOLANT LEAKS AND ENGINE BLOCK HEATER FAILING DOES NOT COVER MY YEAR EVEN THOUGH THE ISSUES ARE COMPLETLY THE SAME."

Component: BACK OVER PREVENTION

"See attached document for complaint."

Component: STEERING

"The contact owns a 2016 Ford Fusion. The contact stated that while his wife was making a left turn, the steering wheel lost steering capabilities, and the vehicle did not steer as intended. The vehicle then ran into a divider on the four-lane highway and then came to a full stop. The contact did not sustain any physical injuries, but his wife sustained emotional injuries. A police report was filed. The contact's wife did not receive medical attention. The vehicle was towed to an independent mechanic, where the failure could not be replicated. The vehicle was then returned to the residence. The contact was notified, and the vehicle was taken to an independent mechanic, where the failure could not be replicated. The manufacturer was notified of the failure. The failure mileage was approximately 206,000."

Component: STEERING

"The contact owns a 2016 Ford Fusion. The contact stated that while driving at an undisclosed speed, the steering wheel started to shake while driving at slower speeds, and the shaking ceased while driving at higher speeds. The message "Steering Fault - Service Now" was displayed. The vehicle was taken to an independent mechanic who diagnosed an ABS and power steering failure and determined that the power steering rack unit needed to be repaired. The independent mechanic scanned the vehicle and retrieved DTC: U0131, 87-48, C102D, 00-8a, and C200D, 49-08. The contact related the failure to NHTSA Campaign Number: 19V632000 (Steering). The manufacturer was notified of the failure. The approximate failure mileage was 104,000."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse(R), the rear-view camera became inoperable. The contact stated that the rear-view camera image failed to function properly, and the image was blurry. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to several dealers, where it was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 61,253."

Component: Tether, Lower Anchor (on car seat or vehicle),Other/I am not sure

"I have concerns about the safety and proper installation of my child’s car seat. The seat is installed in the rear of the vehicle, however I am unsure if the lower anchors and tether system are functioning properly or securing the seat as intended. I want to ensure my child is fully protected in the event of a sudden stop or crash. Additionally, I am reporting ongoing safety concerns with my vehicle related to open recalls. The manufacturer has stated that certain repairs should be completed free of charge, but the dealership has delayed or failed to complete the repairs in a timely manner. These issues raise concerns about overall safety and risk to occupants, especially a young child. The vehicle and car seat are available for inspection if needed."

Component: STEERING

"The steering gear went out causing the steering wheel to completely lock up. It’s costing thousands of dollars to repair. Not sure why this recall isn’t associated with my VIN number but other 2016 ford fusions. My car is in the shop now to be fixed and was quoted over 3k"

Component: POWER TRAIN

"severe coolant intrusion issue where coolant leaks into the cylinders, causing rough running, overheating, and potential engine failure. Very unsafe especially due to the fact the their were recalls on the 2017-2019 but not for 2016 models and ford refuses to replace the engine.ford reproduced a better block however my 2016 isn't covered. There signs of rough idling and a engine code for a failed coil . Replaced all coils and spark plugs just for the car to still ride rough with no warning signs. Ford knows themselves that there was a flaw in the making the recall for the 2017-2019(21N12) . This is a major issue considering several reviews or reddit consumers have encountered the exact issue at 100k miles and less. Even when I took my car to bill estes they only found a missfire due to coil. Nothing specified a coolant intrusion."

Component: ELECTRICAL SYSTEM,SERVICE BRAKES,VISIBILITY/WIPER

"My vehicle has multiple active safety recalls that remain unrepaired. I have already contacted the dealership and attempted to have these issues addressed, but I have experienced delays and a lack of response. The front brake hose recall presents a serious safety risk, as it could rupture and cause a brake fluid leak, leading to reduced braking ability and increased stopping distance. Additionally, the rear view camera recall affects visibility when reversing, as the camera may display a blank or distorted image.I have already filed a complaint with NHTSA regarding these unresolved recalls. One of the recalls currently does not have a remedy available, and the other has not been completed despite my efforts to schedule repairs.These unresolved safety issues put me and others at risk, and I am concerned about the lack of timely action to correct them."

Component: UNKNOWN OR OTHER,VISIBILITY/WIPER

"Back-up camera shuts off during operation. Works intermittently and never for a full operation. This is a 2016 vehicle. Ford has be unable to remedy the situation. Camera has been replaced as well as software updates installed. No fix in sight."

Component: BACK OVER PREVENTION

"See attached document for complaint. In Oct I received letter (see enclosure) that there is a recall on my rear view camera. I’ve been waiting for Sam Galloway Ford in Ft Myers to call me to say they have parts to fix. I called them yesterday 3/9/26 and they didn’t have any idea about when this would happen. The manager suggested I write you. So can you help me? That letter came 5 months ago and it would seem like it would be time to fix the back up camera. I’ll appreciate an answer. Thank you."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rear-view camera became inoperable. The contact stated that the rear-view camera image was blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 133,218."

Component: UNKNOWN OR OTHER

"BACKUP REARVIEW CAMERA A REAR VIEW CAMERA THAT DISPLAYS A BLANK OR DISTORTED IMAGE WHILE IN REVERSE CAN REDUCE OR DISTORT THE DRIVERS VIEW OF WHAT IS BEHIND THE VEHICLE, INCREASING THE RISK OF A CRASH."

Component: ELECTRICAL SYSTEM

"Rear view camera"

Component: STEERING,POWER TRAIN,ELECTRICAL SYSTEM

"I get in my 2016 Fusion to go to dinner and I can barely turn my steering wheel. I put it in park and check the power steering fluid. FULL. I tried resetting the power steering assist by starting the car and turning all the way left then right then center. Still can barely turn. Tried disconnecting the battery hoping it would be an electrical glitch. Come to find out it’s could be a steering assist motor on the steering column that’s going bad and CAN CAUSE THIS PROBLEM WHILE DRIVING! That’s insane!"

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure."

Component: STEERING,SERVICE BRAKES,ENGINE

"I called way scarff ford to have the safety recalls taken care. Got my appointment, stopped the car off in the morning. They kept the car for 3 days and after the 3rd day they said everything is good to go. Go there in Auburn WA couldn't find my car. Took 4 people or including myself. Then it took another half hour to 45 min to find my car. Go get in the vehicle and something doesn't seem right. Everything still felt the same. I look under the hood and find that the the recalls for the cable bushing wasn't corrected so let led me to think that the other recalls were not completed. Befote calling ford corporate to have this issue taken care of we called [XXX] in enumclaw to have this taken care of. Since the car was at way scarff my car started to act funny. Lean idle, really rough idle vibration with now a code P0299 which is the underboost. I do not think they hooked the hoses up correctly. So now my car is acting really funny. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)"

Component: BACK OVER PREVENTION

"See attached document for complaint."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that while reversing, the rearview camera displayed a black image. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received a recall notification for NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part required to complete the recall repair was unavailable. The dealer was not made aware of the failure. The manufacturer was not made aware of the failure. The failure mileage was unknown."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The local dealer was contacted and confirmed that the part to repair the vehicle was not yet available. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The contact had not experienced a failure."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer; however, the vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact stated that the rear sensor for the camera was inoperable. The contact stated that unknown warning lights were illuminated. The contact received a notification letter of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 66,000."

Component: ENGINE

"The contact owns a 2016 Ford Fusion. While driving at an undisclosed speed, there was an abnormal knocking sound coming from underneath the hood. The vehicle was towed to a dealer to be diagnosed, and metal shavings were found inside the engine in cylinders #1 and #4. Additionally, oil was found on top of the pistons in cylinders #2 and #3. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 125,763."

Component: UNKNOWN OR OTHER

"Transmission valve body w/solenoid, diagnostic"

Component: UNKNOWN OR OTHER

"We had the door latch recall fixed just over a year ago and now our door won't close. The latch is broken again and it needs to be fixed FREE"

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed a blank image. The message "Camera Unavailable" was displayed. The dealer was contacted and informed the contact that the recall part was only available for Ford Mustang vehicles. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,000."

Component: BACK OVER PREVENTION

"The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a white screen while the vehicle was in reverse(R). The message "Rear-view Camera Unavailable," was displayed on the center screen. The contact stated that the failure obstructed the driver's ability to safely operate the vehicle. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown."