Vehicle Recalls

A broken control arm can result in the loss of control of the vehicle, increasing the risk of a crash.

The side stand could bend or break in the pivot area, allowing the motorcycle to fall over, increasing the risk of personal injury to the operator or others near the motorcycle. Even without falling over, a bent sidestand may interfere with the proper operation of the sidestand safety switch, preventing the bike from starting or causing the bike to stall without warning.

If the axle separates from the brush chipper, there is an increased risk of a crash.

If the wiper arm detaches, the windshield wiper will fail and the driver's visibility may be reduced, increasing the risk of a crash.

Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.

The side and curtain air bags may not deploy in a crash for which those air bags were intended to deploy, increasing the risk of personal injury to the vehicle occupants.

Reduced brake performance may lead to a vehicle crash.

Prolonged use of the system in these applications can result in the degradation of the bearing grease, thereby potentially resulting in a bearing failure and subsequent wheel end fire.

If oil spills onto the rear tire, there is an increased risk of a crash, leading to personal injury or death.

Incorrect tire placard information such as an incrorrect recommended pressure may lead to tire inflation errors which could result in tire failure, increasing the risk of a crash.

An inaccurate label could lead to improper vehicle loading specifications which could lead to a tire failure which may result in personal injury or property damage.

Reduced brake performance increases the risk of a crash.

If this occurs, a leak could develop, and in the presence of an ignition source could result in a fire and/or explosion, increasing the risk of personal injury or property damage.

An inaccurate label could lead to improper vehicle loading specifications which could lead to a tire failure which may result in personal injury or property damage.

Without a separate reservoir for each brake, having its own cover, seal, and cover retention device, fluid for one brake circuit may move to the other. If this happens, both reservoirs could lose fluid as a result of a fluid leak in one brake circuit and compromise the stopping ability of the braking system, increasing the risk of a crash.

In the event of an emergency, egress of the bus may be hindered possibly resulting in injury to the vehicle occupants.

In the event of a fire, the lack of a fire detector can lead to an increased risk of personal injury and/or property damage.

A stuck throttle may result in very high vehicle speeds and make it difficult to stop or slow the vehicle, which could cause a crash, serious injury or death.

A wheelchair occupant may defeat or ride over the insufficiently latched roll stop. If this occurs when the lift platform is in an elevated position, the wheelchair's occupant could fall and sustain injury.

Over time, the bumper may fail and/or separate from the vehicle, increasing the risk of personal injury and property damage.