Vehicle Recalls

If the seat belt locking mechanism does not function as intended, the bus driver may not be properly restrained, increasing the risk of personal injury in the event of a crash.

In the event of a fire, if the fire extinguisher does not work correctly, there is an increased risk of injury to the truck occupants.

An electric propulsion system shut down will cause a stall-like condition, increasing the risk of a crash.

If the driver or passenger door opens unexpectedly while the vehicle is in motion, there is an increased risk of a crash and injury.

If the communication between the ABS components and the module is reversed, it can cause vehicle instability during braking, increasing the risk of a vehicle crash.

If the stopper fractures, the transmission may not shift properly, increasing the risk of a crash.

Engine shut down and a subsequent cool down period may delay medical treatment or assistance to those needing it, increasing their risk of injury.

If the leaf spring spacer block fractures, the pieces may become a road hazard. If the entire spacer block separates from the vehicle, the alignment of the rear axle may suddenly shift. Either condition could increase the risk of a crash.

If the rivet shears causing the quad step to fail, the step user may fall, increasing the risk of personal injury.

If the vacuum pump relay overheats, there is an increased risk of a vehicle fire.

If the interior door handle return spring is unseated, the door may unlatch in the event of a side impact crash, increasing the risk of personal injury.

An engine stall increases the risk of a crash. Overheated terminals may result in a vehicle fire.

The Slide or Tilt roof panel switch may inadvertently be pressed and the roof panel may auto-close unexpectedly, increasing the risk of a pinch injury.

If the attaching bolts fail, the boom may fall, increasing the risk of injury to the operator or those nearby.

If the label is missing front and rear rim size information, the owner may replace the rims with ones that are an incorrect size, increasing the risk of crash.

If the underlift boom tilt cylinder drifts down during towing, the vehicle that is being towed may contact the road surface, increasing the risk of the vehicle crash.

Damage to the wires that control the brakes may unexpectedly lengthen the distance needed to stop the vehicle, increasing the risk of a crash. Additionally, a short in the wires may increase the risk of a fire.

Bearing failure or wheel detachment would increase the risk of a crash.

A trailer wheel lock up would increase the risk of a crash.

If the inflator separates from the back plate in the event of a crash necessitating deployment of the driver's frontal air bag, this may cause the air bag or steering wheel components to separate and be propelled into the interior compartment, potentially seriously injuring the driver or other occupants. Additionally, the air bag may fail to properly inflate, increasing the risk of injury to the driver.