Vehicle Recalls

A damaged steering knuckle can fail, causing a loss of steering, thereby increasing the risk of a crash.

Water may get into the BIM/BIR and create electrical arcing, increasing the risk of a fire.

Trim that separates from the vehicle during use can cause a road hazard and increase the risk of a crash.

A detached upper control arm can cause the wheels to lean in or out, decreasing the driver's ability to steer and increasing the risk of a crash.

If one of the hoses between the cylinder and the external counterbalance valve manifold were to fail to hold pressure, the boom could unexpectedly lower, increasing the risk of an injury.

A bed frame that drops can increase the risk of an injury.

An inoperative charging system can result in an engine stall, increasing the risk of a crash.

An inoperable front brake switch will not illuminate the brake light when the rider applies the front brakes. Following vehicles may not realize the motorcycle is braking. Cruise control will not shut off with the application of the front brakes. Both conditions increase the risk of a crash.

A bed that falls unexpectedly increases the risk of injury or death.

Over cured tires can result in a sidewall break causing a sudden loss of air pressure or the tread separating from the tire. Both conditions increase the risk of a crash.

A battery fire increases the risk of injury.

The failed weld may allow fuel to leak, increasing the risk of a fire in the presence of an ignition source.

Combustion in the intake manifold can increase the risk of a fire.

Adjusting the horizontal headlight beam can increase glare, reducing the visibility of an oncoming driver or the vehicle operator, increasing the risk of a crash.

If the shoulder belt and ground anchors detach during a crash, their would be an increased risk of injury to the occupant.

If the rotation bearing bolts fail, the boom could fall, increasing the risk of injury or death.

If the axle breaks, it could result in serious injury or death.

If the vehicle shuts down or loses exterior lighting while driving there could be an increased risk of a crash.

Defective drive shafts may fail and cause a loss of connection between the transfer case and rear axle, possibly resulting in a vehicle rollaway when in Park or a loss of drive. Either condition can increase the risk of a crash. The drive shafts can also deform and separate from the driveline and potentially contact the fuel tank, increasing the risk of fuel leaks and/or fire.

The failed bracket could result in a loss of park function which can cause unintended vehicle movement, and loss of motive power while driving which increases the risk of a crash.